msi doesn't work. Windows Installer Error - Troubleshooting

The installation of an application or program on a computer is not always successful.

When you try to install a software product on a computer running the Windows 7 operating system, a Windows Installer package error appears.

Reasons for the error

Read also: Everything about the NET Framework for Windows 10 Download methods, installation methods and common errors

Before you try to fix the problem, you need to find out the exact cause of its occurrence. The main reason for the error is the restriction of access rights.

In other words, when you run the installation file, the system cannot determine whether the user has sufficient rights to run it.

Often the message “Windows Installer package error” is accompanied by numbers and letters. This data points to folders that the user does not have access to.

The error may also be caused by the absence of several files in the installation program.

Some files can be destroyed by an antivirus program, mistaking them for malicious ones.

If the application was downloaded from a pirated resource, then it is quite possible that a number of files necessary for correct installation were initially missing.

When installing any application on your computer, you must disable or configure your antivirus program. It is recommended to perform these actions only when there is one hundred percent confidence that the installed file will not harm the computer.

When installing which programs do you most often receive an error message?

Read also: How to change the Windows network type: Instructions for all versions (7/8/10)

A Windows Installer package error appears when installing files with the MSI extension, as well as programs such as , and Java emulators.

In the message containing the error text when installing Java, there is a numeric code - 1721. It reports that there was a failure during the installation of the program.

The reason may be hidden either in the lack of rights for installation or in the antivirus program. In order for the installation of files to become feasible, they must be added to the exclusion list in the antivirus settings.

If after this, the error remains the same, the problem lies precisely in the system’s permission to install the file.

Installing the iTunes application has its own characteristics, which will be discussed below.

Unable to install iTunes - Windows Installer package error

Read also: iMyFone TunesFix: solving all kinds of errors and problems when working with iTunes without losing data!

This error may occur when you try to install iTunes on a computer running the Windows 7 operating system.

To fix it, you can reinstall the operating system. Or, install iTunes correctly.

Correct installation of the program is carried out in the following sequence:

• On your computer keyboard, you need to hold down the “Windows” + “S” keys.
• In the program search window that appears, you need to enter the word “programs and components” and click on the result.

• In the list of programs, you need to find “Apple Software Update”.
• By right-clicking on the program, select the “Restore” sub-item of the context menu. If you click “delete”, then during uninstallation the message “Itunes Windows Installer package error” will appear. Then all you have to do is follow the on-screen prompts.

• After completing all steps to restore the program, it should be uninstalled. To do this, you need to return to the list of programs and click on the “delete” button.
• After uninstalling the program, the computer should be restarted.
• After rebooting, iTunes is installed again.

What to do if the problem persists?

Read also: TOP 3 Simple ways to clear RAM on a computer or laptop running Windows 7/10

However, the above actions do not always prevent a malfunction.

If after performing the above operations the error remains, then you should perform the following series of actions:

1 Right-click on the installation file and select the “open with” sub-item.

2 Select the archiver program from the list that appears.

3 In the window that opens, run the fourth file from the top.

4 Close the archive and try installing iTunes again.

5 The program can be easily installed on your computer.

The iTunes program must be downloaded from the official website.

When installing iTunes, the Windows Installer package error crashes. To resolve this issue, you should follow the steps above.

At the same time, you should not install system updates via the Internet. They must be downloaded from or.

This will prevent Windows Installer package errors from appearing when installing iTunes on Windows 7.

Error when installing files with MSI extension

As mentioned above, the error can occur not only when installing iTunes, but also when trying to install any programs whose installation file has an MSI extension.

Files with the .exe extension are installed without any problems. This is because when working with MSI files, the download utility msiexec.exe is used.

Its failure to work may be the cause of the error.

If an error occurs during installation, then the reason lies in the installation file. The utility works as it should.

The error message can take two forms:

Before fixing the problem, it is necessary to diagnose the operation of the installation utility.

Diagnostics of the utility for installing files

Read also: [Instructions] How to enter Safe Mode in the Windows operating system (XP/7/8/10)

Diagnostics of the functioning of the installation utility is carried out as follows:

• Using the key combination “Win” + “R” you need to open a system window intended for executing commands;

• In the field you need to enter the command services.msc, and confirm with the OK button;
• In the service display window that opens, you need to find the Windows installation service (in this case, it is Windows 7);

• After double clicking on the service, the service configuration window should appear. All parameters must be set exactly as shown in the screenshot;

The above problems can be resolved by re-registering the installation utility in the Windows operating system. The re-registration process is carried out in the following way:

You need to open the command line, it can be opened in several ways: using the keyboard shortcut: “Windows” + “X”, or by launching the command line utility, which is located in the “standard programs” folder.

In addition to these methods, the command line can be launched using the cmd.exe command in the “Run” window.

The following commands fit into the 32-bit version of the operating system:

Commands for 32-bit version

In the 64-bit version of the system, you need to enter:

After completing entering commands, they must be confirmed by pressing the Enter key. After confirmation, the computer should be restarted.

The command line is launched as an administrator. Command Prompt not only scans your computer for damaged files, but also replaces them with intact ones. To do this, the PC must be connected to the Internet.

After scanning the files and replacing them has been completed, you should restart your computer. After rebooting, you need to try running the installation file with the MSI extension.

In addition to the installer recovery utilities built into the system, Microsoft offers a third-party utility. It can be downloaded from the official website of the corporation.

It is worth noting that it works on Windows 7, XP, Vista.

It works for you: Unknown Unknown
msi.dll repair program is compatible with your operating system

Symptoms of msi.dll error

msi.dll refers to certain features and resources that allow applications or games to run properly on your PC. If the msi.dll library is missing or damaged for some reason, errors may occur. When a dll error occurs, the user is typically notified with a pop-up message that provides information about the error that occurred.

msi.dll Error Screenshot

Other possible msi.dll errors:

• msi.dll failure
• msi.dll not found
• msi.dll could not be found
• msi.dll access violation
• Cannot find msi.dll

How to fix msi.dll error

To fix msi.dll error or other dll file errors automatically, download DllKit, a corrupted dll repair application, and scan for damaged or missing dll files. DllKit will also check to see if other dll files are registered on your system and look for other problems that may be preventing your system from working properly. Once the scan is complete, DllKit will help you fix the errors.

Introduction

Our installers for Windows contain a complete client side installation package (MSI) (built on the basis of Windows Installer v2.0). The network installation instructions assume that the user is familiar with the basics of Windows Installer, particularly how to deploy MSI files. This package can be used with any Windows operating system that supports Windows Installer v2.0.

Installation on a network server

1. Double click on the resulting file ( Yenka_Setup_(MSI).exe)
2. Install this package into your programs' shared folder.
3. Attention : The program must be activated BEFORE deploying the package on the network. To do this, run "Yenka.exe" from the folder where you installed the program (<путь установки>\program files\Yenka\Software\Yenka.exe), and follow the Activation Instructions.

Installation

Installing an MSI package using the command line

1. In the command field, enter the line:
   msiexec /i"<путь к MSI файлу>\YK.msi"
   Where:<путь к MSI файлу>this is the path to the Windows Installer package file. For example, the line might look like this: msiexec /i"C:\Program Files\Yenka\YK.msi"
2. Press ENTER
   Attention: The Windows Installer service allows installation in “stealth” mode, using the “/q” switch. For example: msiexec /i"C:\Program Files\Yenka\YK.msi" /q. To show the installation progress indicator, you can use the key " /qb".

Uninstalling an MSI package using the command line

1. From the Start menu, select "Run..."
2. In the command field, enter the line:
   msiexec /x"<путь к MSI файлу>\YK.msi"
   Where:<путь к MSI файлу>this is the path to the Windows Installer package file
3. Press ENTER

These instructions should help if you see one of the following error messages when installing a program on Windows 7, Windows 10 or 8.1:

• Windows 7 Installer service is not available
• The Windows Installer service could not be accessed. This can happen if the Windows Installer is installed incorrectly
• Failed to access Windows Installer service
• Windows Installer may not be installed

Another way to fix the Windows Installer service not available error is to re-register the Windows Installer service on the system.

To do this, run the command line as an administrator (in Windows 8, press Win + X and select the appropriate item, in Windows 7 - find the command line in standard programs, right-click on it, select “Run as Administrator”).

If you have a 32-bit version of Windows, then enter the following commands in order:

Msiexec /unregister msiexec /register

This will re-register the installer service on the system, after running the commands, reboot your computer.

If you have a 64-bit version of Windows, then run the following commands in order:

%windir%\system32\msiexec.exe /unregister %windir%\system32\msiexec.exe /regserver %windir%\syswow64\msiexec.exe /unregister %windir%\syswow64\msiexec.exe /regserver

And also restart your computer. The error should disappear. If the problem persists, try starting the service manually: open a command prompt as an administrator, and then enter the command net start MSIServer and press Enter.

3. Reset Windows Installer service settings in the registry

As a rule, the second method is sufficient to fix the Windows Installer error in question. However, if the problem still cannot be solved, I recommend that you familiarize yourself with the method of resetting service parameters in the registry, described on the Microsoft website: http://support.microsoft.com/kb/2642495/ru

Please note that the registry method may not be suitable for Windows 8 (I cannot give exact information on this matter.

MSI laptop screen not working? What measures should be taken in this case? First of all, you should connect the laptop to the monitor and check whether the image appears on the external monitor or not. If it appears, then, most likely, the laptop’s matrix or cable has become unusable. If not, the failure lies in the hardware itself. And here it is already necessary to consider several options.

1. Problems may occur when opening and closing the lid. If you suddenly notice that the display turns off when closed, then goes into sleep mode, and turns on when opened, this already suggests that the reason should be sought in the power button itself. It very often suffers from moisture or dirt getting inside, as a result of which it sticks. The button is most often located in the upper corner, on the panel where the monitor is located, or where the lid snaps into place. If it is damaged, it will be necessary to make a quality replacement.
2. If MSI shows, but there is no backlight, this means that the inverter itself or the backlight is faulty. These two components are responsible for the illumination of the laptop computer. We will inspect the equipment and tell you whether the inverter can be repaired or not. Most often you have to completely change the inverter or backlight lamp.
3. If the matrix is ​​black, and there is or is no backlight on the sides, it is necessary to consider several options, since the hardware itself is damaged:

• In 80% of cases the display does not show if the video chip becomes unusable. As a rule, this happens as a result of overheating.
• At 5% if monitor stopped working, this may mean that the memory module, power supply, or some other component is not working. Everything needs to be checked.
• In 10%, other problems may arise. It will be possible to determine the breakdown only after we carry out a complete diagnosis in the telemama service.

MSI laptop display won't turn on

If the MSI laptop boots and everything freezes.

1. Naturally, this may indicate that the problem is in the hard drive itself.
2. An error may also occur on the hard drive.

However, malfunctions most often occur as a result of some kind of mechanical damage. It is not always possible to immediately determine the cause of a breakdown. That’s why our service center specialists first carry out a complete diagnosis. In any case, we will repair MSI CR/CX, G-series, FX/FR, Wind Top and Wind.